Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 63: Paramètres de communications d'une interface radio entre 860 MHz et 960 MHz, Type C

This document defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz industrial, scientific, and medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used to develop RFID application standards. This document is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace.

It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface.

This document specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks-First (ITF) systems. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is ITF, i.e. a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator.

This document specifies

—    physical interactions (the signalling layer of the communication link) between Interrogators and tags;

—    logical operating procedures and commands between Interrogators and Tags;

—    the collision arbitration scheme used to identify a specific tag in a multiple-tag environment;

—    optional security commands that allow the use of crypto suites of ISO/IEC 29167.